Cold Welding for PVC floor and wall coverings and also PVC skirtings. To create a good cold welding, stick masking tape over the joint and cut a strip alongside the joint. Inject the cold welding liquid by overflowing. Then remove the masking tape. Soldered joint scan be walked on within 10 minutes. Caution! The soldered joint completely hardens after 1 hour only.Type A PVC COLD WELDING LIQUID, For watertight sealing of closely cut seams in PVC Floor Coverings or PVC Wall Coverings, the tube of liquid has a coverage of Approximate 60m of seam. Instructions enclosed.The ProcedureThe patented needle system opens the seam area briefly and cold welding liquid runs along needle into the whole cross section of the seam. The adjacent edges are moistened by the cold welding liquid, temporarily dissolved and melted together, becoming strong and durable after a short period of time.
